JR 9X V2 / JR 9303 Setup

The throttle connects to THRO channel (1)

The auxiliary connects to GEAR channel (5)

ATV setup [TRVL ADJ.]

Setup the throttle servo and linkage as close to +/- 100% ATV as possible.

Set the GEAR channel ATV to +100% and -100%

The system is now ready for calibration. Calibration Procedure

The target rotor speed can be calculated using the ATV Calculator

Activate the GOVERNOR function in the DEVICE SEL menu (accessed from the SYSTEM Menu)

GEAR

SW

OUT:GOV

In the GOVERNOR screen, set the values which correspond to ATV values (RPMs) for each flight mode.